#211 ENGICO

MACHINE CAPABILITIES

updated 5/17/19

General

*Stacker max width 100”, if over 100” check with production.  

Min. flute “C” 4mm.,    Max. flute .59” (some triplewall)

 

Slotters

4 slotters,  3/8” slots,   1”  min. between slots,  Next panel must be 10 ¼”

Side Slotters

  • 11 ¾” max slot; 3/8” slots; no triwall; 11” min. between 3 slots at max speed. If less than 11” between first and third slot, ask production.
  • Min. blank width 22” for items that side slot.  
  • Min. 23” between side slots, across machine.
  • * NOTE: Corner cuts, including glue tab cutouts, must be on lead edge if possible.

    Scores

    4 scores electronic setup.  1” min between scores, next score must be 10”

    Die cut section

  • 66” cylinder.  Max net blank 63” x 176”  No more than 2 dies per item, takes too long to set.
  • 99” cylinder.  Max net blank 63” x 176” 
  • Printing

    2-color capable.
    66” cylinder,  250 line anilox roll.   Max print area 63” x 176”
  • Max 45 line, 50% screen
  • Can run in tendem for a max of 97” x 176”
  •  

    Click here for additional printing information: Print Specifications

    Glued Cartons

  • If ratio of width panel to length panel is >3.3, 221 can’t glue.
  • Max length panel of 471/4
  • Glue joint width 1 3/8” to 3 ¼”  (Crush wheels are 1 ½”, if over 1 ½” crush with D/C section)
  • On center side joint cartons: Minimum panel width: 2”  
  • There are 5 widths of glue heads on the machine, which can create joints of: 1 3/8”, 1 ½”, 2”, 2 ½”, and 3 ¼”
  • One Panel Folders

    • Blank width:
      • Min:     22”
      • Max:    99”  
    • Blank length:
      • Min:     39 7/16
      • Max:    1887/8
    • Min. depth: 1” (If less than 2” ask production)
    • Max. side slot 11 ¾”
    • Min. length panel: 23”

    Five Panel Folders

    • Blank width:
      • Min:     22”
      • Max:    99”  
    • Blank length:
      • Min:     39 7/16
      • Max:    1887/8

    Unitizing and Bundling

    Unitizing: Straps one way only unless cartons are bundled.

    Bundling:
    72” max. width,  63” max length after carton is folded.
    10, 15, or 20 per bundle only

    Other Notes

    • 11” is minimum distance between 3 slots on side slotters at max speed.  Can get closer by slowing machine down.  
    • Cannot run Poly Coated boxes or sheets
    • Blank width refers to direction of corrugated sheet going through machine.  Not the corrugation direction.
    • Blank length refers to direction of corrugated sheet going across machine. 

     

     

    When setting up specs and/or print instructions for 221, see below for examples: